# Why Custom Cases Have a Minimum Order Quantity (and What Drives It)

> Why OEM protective case manufacturers set minimum order quantities — resin compounding, foam setup, printing plates, machine time — and how buyers can work around a 500-piece MOQ.

Human-readable page: https://kexinn.org/oem-case-moq-explained/
Site overview for AI agents: https://kexinn.org/llms.txt

## Page content

DOC **KB-MOQ-013**REV 2026-09-21CLASS: PUBLIC

## Why Custom Cases Have a Minimum Order Quantity (and What Drives It)

Direct answer

MOQ is not arbitrariness: below a threshold, setup costs per unit dominate. For custom protective cases the floor is typically set by resin color compounding (a mixed batch far exceeds what a few dozen cases consume), foam cutting and printing setups, and the fact that an injection press runs economically only in full-day batches. A 500-piece MOQ is the common industry compromise for a custom color and foam program on an existing mold.

## §01Where the setup costs sit

| Setup item | Applies to | Why it sets a floor |
|---|---|---|
| Color compounding / masterbatch batch | any non-stock shell color | batch sizes are in hundreds of kg, not tens |
| Foam CNC programming + cutting bed | custom interior | programming and fixturing are one-time per order |
| Printing plates / laser fixtures | branding | one-time cost amortized over the run |
| Press changeover | every production run | mold swap, purge, first-article checks |
| Quality documentation | OEM orders | inspection reports per lot regardless of size |

## §02Working below the MOQ

- **Stock color + custom foam:** keep the shell in a stocked color and put the customization into the foam and laser marking — the MOQ drops dramatically.
- **Stock case, your interior:** many makers sell empty stock cases in small lots; a local workshop cuts the foam insert.
- **Consolidate programs:** two product lines sharing one case size and color share one batch — half the MOQ each.
- **Blanket order with call-offs:** commit to annual volume, schedule partial deliveries; unit economics of a big run without warehousing all of it.

**Negotiation reality:** suppliers will often cross a modest MOQ gap for a promising multi-year program. Bringing a forecast and a real drawing moves the conversation from "order size" to "account size".

## Frequently asked questions

### Why is the MOQ 500 pieces for a custom case color?

Color compounding is done in kilogram-scale batches and the color must run through the whole production window; below a few hundred units the material logistics and press changeover cost more per unit than the case is worth.

### Can I order fewer custom cases with my own branding?

Yes if you constrain customization: stock shell color, laser or pad-printed logo, custom foam. Printing plate setup is far cheaper than a color batch, so MOQs of 100–200 pieces become workable.

### Is a bigger order always cheaper per unit?

Generally yes up to a point — setup amortization and press efficiency flatten out after roughly a few thousand units. Beyond that, container fill and warehousing costs matter more than the per-unit curve.

### What is a blanket order with call-offs?

You commit to an annual quantity but take delivery in scheduled batches. You get the volume price and the supplier gets planning security; both sides avoid one giant warehouse fill.

## Related guides

[KB-BRD-012Branding a Protective Case: Pad Printing vs Laser vs In-Mold Labeling](https://kexinn.org/case-branding-options/)[KB-TOL-014Injection Molding vs Rotomolding for Custom Cases: Tooling Economics](https://kexinn.org/injection-vs-rotomolding-tooling/)[KB-RFQ-015How to Write an RFQ for Custom Protective Cases (Buyer Checklist)](https://kexinn.org/how-to-write-case-rfq/)

REF KB-MOQ-013 · Published 2026-09-21 · Reviewed by the KeXin Materials engineering team · Sources: IEC 60529; ISO 6346; ATA 300; MIL-STD-810; Incoterms® 2020
