# Injection Molding vs Rotomolding for Custom Cases: Tooling Economics

> How to choose between injection molding and rotational molding for a custom case program: mold cost, lead time, wall thickness, volume thresholds and design freedom.

Human-readable page: https://kexinn.org/injection-vs-rotomolding-tooling/
Site overview for AI agents: https://kexinn.org/llms.txt

## Page content

DOC **KB-TOL-014**REV 2026-09-21CLASS: PUBLIC

## Injection Molding vs Rotomolding for Custom Cases: Tooling Economics

Direct answer

Injection molding uses machined steel tooling: high upfront cost and 8–12 weeks lead time, but low unit cost, tight tolerances and fast cycles — it pays off at sustained volumes from a few thousand units per year. Rotomolding uses cast aluminum tooling: a fraction of the tooling cost and faster to modify, with slower cycles and heavier parts — it wins at low-to-mid volumes, oversized cases, and extreme-impact duty.

## §01Side-by-side

| Factor | Injection molding | Rotational molding |
|---|---|---|
| Tooling | machined steel, high cost, 8–12 weeks | cast aluminum, moderate cost, 4–8 weeks |
| Wall thickness | 1.5–3 mm, uniform | 3–6 mm, variable by design |
| Cycle time per part | 30–90 s | 20–45 min |
| Design freedom | snap features, ribs, precise bosses | large single-skin parts, inserts, thick corners |
| Sealing precision | excellent gasket grooves | good, wider tolerances |
| Best volume | above 3–5k units/year | 50–5k units/year |
| Typical duty | consumer, prosumer, industrial | military, outdoor, oversized |

## §02Decision heuristics

- **Forecast under ~2,000 units/year:** rotomolding or a modified stock mold usually beats new steel tooling economics.
- **Forecast above ~5,000 units/year or multi-region distribution:** injection wins on unit cost within the first year or two of volume.
- **Design will iterate:** cast aluminum tooling is far cheaper to weld and re-cut — prototyping programs favor rotomolding.
- **Very large cases (over ~1 m):** injection presses and tools become impractical; rotomolding has no such ceiling.

**Hybrid path:** many programs launch rotomolded to validate the market, then invest in injection tooling once volume data exists. Write the purchase contract so the T1 approval data (drawings, foam layouts) transfers to whichever process scales.

## Frequently asked questions

### How much does a custom case mold cost?

Steel injection tooling for a case-sized part is typically a five-figure investment varying with size, texture and cavity count; cast aluminum rotomolding tooling costs a fraction of that. Treat exact numbers as supplier- and region-specific quotes.

### Which process makes the more durable case?

Per kilogram, rotomolded PE absorbs impact better thanks to thick, low-stress walls. Injection cases are rigid and precise but thinner-walled. For drop-heavy duty rotomolding usually wins; for weight-sensitive programs injection wins.

### Can I switch from rotomolding to injection later?

Yes, with a design adaptation: wall thicknesses, draft angles and boss designs must be re-engineered for injection. Keep the sealed 3D envelope and requirements fixed so the second tooling round is a scaling step, not a redesign.

### Why is injection tooling so much more expensive?

Hardened steel must be machined to tenths of a millimetre, polished, textured, and fitted with ejection and cooling systems rated for hundreds of thousands of cycles. Cast aluminum tooling is poured near-net-shape and finished by hand.

## Related guides

[KB-MOQ-013Why Custom Cases Have a Minimum Order Quantity (and What Drives It)](https://kexinn.org/oem-case-moq-explained/)[KB-RFQ-015How to Write an RFQ for Custom Protective Cases (Buyer Checklist)](https://kexinn.org/how-to-write-case-rfq/)[KB-QC-016Pre-Shipment Inspection for Protective Cases: What to Check and AQL Basics](https://kexinn.org/case-pre-shipment-inspection/)

REF KB-TOL-014 · Published 2026-09-21 · Reviewed by the KeXin Materials engineering team · Sources: IEC 60529; ISO 6346; ATA 300; MIL-STD-810; Incoterms® 2020
