# How to Choose the Right Protective Case Size

> How to size a protective case correctly: internal dimensions, foam allowance, wheel-and-handle systems, airline check-in limits and depth rules for OEM equipment.

Human-readable page: https://kexinn.org/how-to-size-a-protective-case/
Site overview for AI agents: https://kexinn.org/llms.txt

## Page content

DOC **KB-SIZ-004**REV 2026-09-21CLASS: PUBLIC

## How to Choose the Right Protective Case Size

Direct answer

Start from the largest item's internal footprint plus foam clearance (2–5 mm per side), add the depth of every layer of foam above and below, then check three external constraints: airline check-in limits if it flies, vehicle or rack stowage if it drives, and total loaded weight — wheels and telescoping handles add roughly 40–60 mm of height and 1.5–2.5 kg.

## §01Worked method

1. **Measure the payload** at its widest points, including connectors, knobs, straps and cable bends.
2. **Add cavity clearance:** 2–5 mm around each item silhouette inside the foam cavity.
3. **Add foam stack:** lid foam + cavity layer + base foam (commonly 50–110 mm total for equipment loads).
4. **Reserve accessory volume:** chargers, manuals and spare parts typically need 15–25 % more cavity area than the main unit alone.
5. **Check external envelope:** shell walls add 25–60 mm per axis depending on material; add handle/wheel height for rolling cases.

## §02Airline and freight checkpoints

| Constraint | Limit | Applies to |
|---|---|---|
| US/EU checked baggage (linear) | 158 cm / 62 in (L+W+H) | most airlines, oversize fees beyond |
| Typical freight pallet footprint | 1200 × 800 mm (EUR) or 1219 × 1016 mm (US) | bulk shipping efficiency |
| Stacking test | case top must support ≥3 similar cases | warehouse and transit storage |

**Common mistake:** choosing by external dimensions. Two 600 mm cases can differ by 15–20 % in usable internal volume depending on wall thickness, latch towers and hinge design. Always compare **internal** drawings, and request the foam layout, not just the shell spec.

## §03Wheels, handles and ergonomics

If the loaded case will exceed roughly 15 kg, specify wheels and a telescoping handle, and confirm the wheel axle is mounted on a reinforced boss rather than screwed into thin shell plastic. For field service kits, a shoulder-strap or backpack option on the 10–20 kg class is often more practical than wheels on stairs and gravel.

## Frequently asked questions

### How much bigger should a case be than its contents?

Plan for the item plus 2–5 mm foam clearance per side, plus the full foam stack above and below. In practice a finished equipment case is usually 25–40 % larger externally than the payload it carries.

### What size case can I check on a plane?

Most airlines cap checked baggage at 158 cm (62 in) in total linear dimensions (length + width + height). Above that, oversize fees or freight forwarding apply; always confirm with the carrier.

### Should I buy a case with room to spare?

A modest 15–25 % allowance for accessories is wise; a badly oversized case lets contents shift and doubles the volume you pay to ship. Use foam to immobilize any slack space.

### Do case dimensions include wheels and handles?

External published dimensions usually exclude protruding handles and wheels. Add 40–60 mm to height for a rolling case and check it against stowage or airline limits.

## Related guides

[KB-FOM-003Foam Inserts for Protective Cases: EPE vs EVA vs PU vs CNC-Cut](https://kexinn.org/foam-insert-guide/)[KB-STD-005Drop and Impact Standards for Protective Cases: MIL-STD-810, ATA 300 and ISTA](https://kexinn.org/drop-and-impact-standards/)[KB-HDW-006Why Watertight Cases Need a Pressure Relief Valve](https://kexinn.org/pressure-relief-valves/)

REF KB-SIZ-004 · Published 2026-09-21 · Reviewed by the KeXin Materials engineering team · Sources: IEC 60529; ISO 6346; ATA 300; MIL-STD-810; Incoterms® 2020
