# Custom OEM Protective Cases: Realistic Timeline From RFQ to Shipment

> A stage-by-stage OEM case development timeline — RFQ, drawing, tooling, T1 samples, validation and mass production — including typical lead times with existing versus new molds.

Human-readable page: https://kexinn.org/custom-oem-case-timeline/
Site overview for AI agents: https://kexinn.org/llms.txt

## Page content

DOC **KB-OEM-010**REV 2026-09-21CLASS: PUBLIC

## Custom OEM Protective Cases: Realistic Timeline From RFQ to Shipment

Direct answer

For an injection-molded OEM case, expect about **45 days** from confirmed drawing to shipment when the factory already has a suitable mold, and about **125 days** when new tooling must be cut — tooling and first-article validation dominate the second figure. Color, foam, hardware and print customization happen in parallel and rarely extend the schedule if specified early.

## §01Stage-by-stage

| Stage | Existing mold | New mold | What happens |
|---|---|---|---|
| RFQ & drawing freeze | week 0 | week 0 | 3D/2D confirmed, resin, color, hardware locked |
| Tooling | — | weeks 1–10 | mold design, steel cutting, fitting |
| T1 samples | week 1 | weeks 11–13 | first shots; wall, warp and gloss checked |
| Validation | weeks 1–3 | weeks 13–15 | sealing/drop checks, foam fit, corrections (T2 if needed) |
| Mass production | weeks 3–5 | weeks 15–16 | molding, assembly, foam CNC, QC |
| Shipment (EXW/FOB) | ≈day 45 | ≈day 125 | packing, inspection, handover |

## §02What shortens or lengthens the schedule

- **Locked drawings.** Every post-T1 geometry change re-enters tooling; a frozen 3D file at week 0 is worth weeks later.
- **Standard hardware.** Custom latches or valves add 30–60 days of sourcing; catalog hardware does not.
- **Color compounds.** Custom-matched resins need 1–2 weeks of compounding; a stocked masterbatch color does not.
- **Validation depth.** Buyer-witnessed drop and IP testing adds calendar time but is cheap insurance on first orders.

**Planning tip:** put **inspection rights** (third-party or remote video) and a **T1 sample approval gate** in the purchase contract. The T1 gate is where 90 % of OEM disappointments are preventable.

## Frequently asked questions

### How long does OEM case production take with an existing mold?

Typically around 45 days from confirmed drawing to EXW/FOB handover, covering T1 confirmation, validation, mass molding and foam work. Complex foam or electronics integration can extend this.

### Why does new tooling take so much longer?

Cutting and fitting an injection mold for a case-sized part takes roughly 10 weeks alone, followed by first-article iterations. That is why a new-mold program is realistically about 125 days.

### When should I pay for a new mold vs adapt a stock case?

If annual volume is a few thousand units, a modified stock case with custom foam is usually the right economics. New tooling pays off at sustained volumes, when branding, stackability or sealing requirements demand a bespoke shell.

### Can color and logo be customized without new tooling?

Yes. Resin color, in-mold labels, pad printing, laser marking and custom foam are all possible on existing molds and are quoted as small add-ons with minimal schedule impact.

## Related guides

[KB-BUY-009EXW vs FOB: Shipping Terms for Protective Case Buyers](https://kexinn.org/exw-vs-fob-for-case-buyers/)[KB-TRV-011Flying with Equipment Cases: Airline Rules, ATA 300 and Transit Prep](https://kexinn.org/airline-travel-with-equipment-cases/)[KB-BRD-012Branding a Protective Case: Pad Printing vs Laser vs In-Mold Labeling](https://kexinn.org/case-branding-options/)

REF KB-OEM-010 · Published 2026-09-21 · Reviewed by the KeXin Materials engineering team · Sources: IEC 60529; ISO 6346; ATA 300; MIL-STD-810; Incoterms® 2020
