# Which Case for Which Job: Selection by Industry and Use

> Industry-by-industry guidance for protective case selection — tools, medical and lab, AV and broadcast, drones and cameras, test instruments, outdoor expeditions.

Human-readable page: https://kexinn.org/case-selection-by-industry/
Site overview for AI agents: https://kexinn.org/llms.txt

## Page content

DOC **KB-IND-020**REV 2026-09-21CLASS: PUBLIC

## Which Case for Which Job: Selection by Industry and Use

Direct answer

Case selection varies less by shell than by interior and duty class: trades need tool-control interiors and drop toughness; medical and lab need cleanable surfaces, moisture control and ESD-safe foam; AV needs dense custom cavities and discreet styling; drones and cameras need precision-cut EVA and pressure valves; test instruments need rack compatibility and EMI consideration. Start from what the contents fear — impact, moisture, static, heat or theft — and specify against that fear.

## §01By industry

| Use | Interior priority | Duty emphasis |
|---|---|---|
| Field tools / service kits | tool control, pluck or CNC pockets | drop toughness, latch cycles |
| Medical / lab | cleanable, ESD-safe foam, VCI-free | smooth wipeable shells, humidity control |
| AV / broadcast | dense precision cavities, cable management | stackability, discreet appearance |
| Drones / cameras | CNC EVA silhouette cut, lens wells | pressure valve, silica discipline, IP67 |
| Test / measurement instruments | foam + panel mounts, docs compartment | EMI assessment, rack compatibility |
| Expedition / outdoor | mixed storage, removable dividers | −40 °C compounds, UV-stable dark shells, wheels |

## §02Four questions that shortcut the decision

1. **What is the single worst transport event** this case must survive (a 1.2 m drop, a week in a wet truck bed, an airline hold)?
2. **How often is it opened?** — thousands of cycles move the spec toward latch and gasket quality.
3. **Who carries it?** — wheels and telescoping handles above ~15 kg; shoulder straps for stair-heavy urban work.
4. **Does it fly, and how often?** — airline linear limits, TSA locks, ATA-grade hardware for frequent flyers.

**Cross-industry lesson:** failures concentrate at the interior-shell interface — a perfect shell with a loose foam insert still lets contents migrate and break. Spend the engineering time on the foam layout; it is the cheapest insurance in the whole spec.

## Frequently asked questions

### What is the difference between a tool case and a camera case?

Mostly the interior and duty: tool cases prioritize rugged latch cycles and configurable tool control; camera cases prioritize precision-cut cavities, pressure valves and humidity discipline for optics. Shells can be identical.

### Do medical equipment cases need special certification?

Cases themselves are not medical devices, but buyers often require cleanable surfaces, low-odor materials, ESD-safe interiors for electronics, and documentation of material compliance — all specifiable on standard shells.

### What matters most for a drone case?

A silhouette-matched EVA cavity so the airframe cannot migrate, a pressure valve for flights, desiccant discipline for the battery bay, and IP67 sealing if it lands in wet environments.

### Are wheeled cases worth it for field kits?

Above roughly 15 kg loaded weight, wheels and a telescoping handle prevent the drops and strains that ruin both cases and crews. Choose wheel mounts on reinforced bosses, not screwed-in fittings.

## Related guides

[KB-MST-019Moisture and Corrosion Control Inside Protective Cases](https://kexinn.org/moisture-and-corrosion-control-in-cases/)[KB-ECO-021Recyclability of Protective Cases: PP, PE and Designing for End of Life](https://kexinn.org/case-recyclability-and-sustainability/)[KB-CERT-022Certification and Test Evidence: What to Demand From a Case Supplier](https://kexinn.org/certification-and-test-evidence-for-case-buyers/)

REF KB-IND-020 · Published 2026-09-21 · Reviewed by the KeXin Materials engineering team · Sources: IEC 60529; ISO 6346; ATA 300; MIL-STD-810; Incoterms® 2020
